The patented design of the Ramsond RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun--without changing magazines. Powered by compressed air, this tool features patented air booster chambers for maximum driving force and speed. It tackles virtually all thickness of hardwood flooring and includes a non-marring base system to protect against damage. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold. |
Two-in-One Hardwood Flooring Stapler and Cleat Nailer
At a Glance:- Shoots staples and 'L' cleats without changing magazines
- Operates with compressed air (60 - 120 PSI)
- Non-marring base system and adjustable base plate ideal for hardwood floors
- Ergonomic long-reach handle with padded grip keeps you comfortable
- Durable, lightweight die-cast alloy and steel construction
|
|  |
|
Accepts 15.5- and 16-gauge staples from
1" to 2" and "L" cleats from 1-1/2" to 2". |
The two-in-one magazine and driver system accepts both cleats and staples. View larger. |
The RMM4 continuously stores compressed air in two patented air acceleration/booster chambers in the handle. View larger. |
![Ramsond RMM4 Non-Marring Base System](http://g-ecx.images-amazon.com/images/G/01/th/content_26/Q2_2010/c26-B001JT64U6-4-s._V154989467_.jpg")
The base system has two composite disks in front, a middle guide, and a rear nylon-derivative plate. View larger. |
Patented Two-in-One Magazine and Driver System
This dual-purpose tool has a patented two-in-one magazine and driver system that accommodates both cleats and staples. Designed for 15.5- and 16-gauge staples from 1 to 2 inches, and "L" cleats from 1-1/2 to 2 inches, the magazine has a 100 staple/cleat capacity. Loading the fastener is quick and easy--simply pull the magazine back, drop in the fasteners, and release the drawer--it takes less than 10 seconds.Precise Air-Powered Operation
The Ramsond RMM4 operates with the power of compressed air (60 - 120 PSI) and is equipped with a standard 1/4-inch NPT air inlet for easy compatibility. To use, simply attach your air compressor's hose to the RMM4's air inlet, then rest the nose of the RMM4 squarely against your work surface to fire.
The direction and angle of the staple/cleat will be automatically aligned for precision driving. And with only a slight strike of the mallet upon the actuator, the RMM4 will shoot a cleat nail or staple through your flooring at the proper angle and depth.
Patented Air-Booster Chambers
Most conventional flooring nailers/staplers store compressed air within the body of the tool. Upon mallet strike, the air reserved in the body of the tool is released, driving the blade and shooting the fastener. The RMM4 takes this design one step further. In addition to storing compressed air inside its body, the RMM4 continuously stores compressed air in two patented air acceleration/booster chambers located in the handle.
By storing extra compressed air, these sealed chambers ensure that the fasteners shoot with sufficient force for perfect penetration in the flooring surface. The booster chambers also accommodate quicker retraction of the actuator and blade when compared with conventional units.
Non-Marring Base System
Featuring an adjustable non-marring base system, the RMM4 provides protection against scratches and allows you to drive fasteners fast and close to the wall. The base system is equipped with two composite disks in the front, a middle guide, and a rear nylon-derivative plate. The combination of these three mechanisms ensures that the surface of your hardwood flooring is not marred or damaged during installation. It also provides for tool balance and optimal positioning against the work surface for fast, accurate installation.
Works with Most Thicknesses of Hardwood Flooring
The RMM4 series is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates--simply install the appropriate base plate for your application.
Durable and Comfortable
With over 30,000 units sold in North America, the RMM4 is sure to deliver on its promises. Designed for long-term use, the Ramsond RMM4 is an industrial-strength power tool that's comfortable to use. Its body is constructed of a durable, lightweight die-cast alloy, and its driver blade is constructed of heat-treated hardened steel for long-lasting resilience. For user comfort, the RMM4 has a long-reach handle with a padded cushioned grip that offers increased balance and control.
The RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer is manufactured under strict ISO guidelines for quality control and safety, and it is backed by a one-year warranty.
What's in the Box
Flooring Stapler/Cleat Nailer, mallet, goggles, bottle of oil, four Allen wrenches, internal key/wrench, O-ring kit, two nylon composite base plates, and a blow-molded carrying case.
The stapler/cleat nailer, mallet, goggles, oil, and accessories store neatly in a durable carrying case. |
